IntelliTrack WMS – Warehouse Management System - Manual (Page 6)

IntelliTrack WMS RF Server v8.1
2
Pre-Installation Considerations
Note: It is important to read the following information PRIOR to installing
IntelliTrack WMS RF Server.
Before you begin installing IntelliTrack WMS RF Server, please take these
considerations into account: application directory, authentication type, and
operating system.
Required Network/System Information
• Operating System: Verify the operating system installed on your Intel-
liTrack WMS target server PRIOR to the installation of the database
server. Verify the operating system installed on your IntelliTrack WMS
target workstation PRIOR to the installation of the workstation soft-
ware. IntelliTrack WMS supports the following operating systems:
Windows XP Professional, Windows Vista, and Windows 7, Win-
dows Server 2003, and Windows Server 2008. For a complete list of
system requirements, please consult the WMS data sheet on the web-
site:
www.intellitrack.net/upgrades_downloads.asp .
Note: If you are using the Microsoft Windows Vista, Windows 7, or Win-
dows Server 2008 Operating System, make sure that the User Access Con-
trol (UAC) is turned off BEFORE INSTALLING your INTELLITRACK
SOFTWARE. To disable UAC, go to the Control Panel > User Accounts
and Family Safety > User Accounts > Turn User Account Control on
or off. Uncheck the check box to disable UAC and click OK. Windows will
then prompt you to restart the computer.
• Application Directory: Make sure you know which machine Intelli-
Track WMS RF Server will be installed on, and the drive letter of the
\IntelliTrack WMS\RF Server directory (where the application execut-
able resides).
Note: The application directory represents the target path where the work-
station application executable resides.