Inter-M RM-01 - Manual (Page 2)

• This microphone built in unit which range is from 60Hz to 18,000Hz.
• Zn diecasting stand can decrease touch noise.
• This microphone can broadcasting with using remote chime, or remote talk switch.
FEATURES
• After opening the cover of the stand bottom, connect the Receiver or the Remote Chime for the
system to the 2P terminal block.
CONNECTION FOR REMOTE CHIME
NAME OF GOOSE NECK ASS’Y
1. WIND SCREEN
2. UNIT
This unit which range is from 60Hz to 16,000Hz can make sound.
3. UNIT BASE
This base settles unit, and made of aluminium ware to protect goose neck not to be lower.
4. GOOSE NECK
This goose neck can adjust the direct of unit without moving stand.
5. CONNECTOR HOLDER
This case is in order to connect stand to connector.
6. 3P CONNECTOR
XLR connector of stand.
7. WRENCH BOLT
This screw solidifies mounting between goose neck and connector holder.
SAFETY INSTRUCTION
In order to correct operation this unit, keep away this microphone from following places.
• Avoid placing it in direct sunlight or close to a source of heat, such as heater, stoves or other
appliance that produce heat.
• Also avoid location subject to vibration and excessive dust.
• Keep away from magnetized appliance.
• This microphone should be situated so that its location or position does not interfere with its proper
ventilation.
• This unit should be situated away from solvents or alcohol or other material that can make fire.
• This microphone should be cleaned with dried soft cloth.
? ? ? ? ? ? ?