Inter-M CD-6208 - Manual (Page 13)

MULTI SOURCE PLAYER
11 CD-6208
(5) Press the 111111 button again to pause.
Press the 111111 button to stop.
※Note:
1. A disc which surface status is not good or a disc which format is not compatible cannot be played
and stopped.
2. When a disc format is not compatible, the window displays “READING ERROR”.
3. When a disc is inserted upside down, then the window displays “READING ERROR”.
4. Only a disc with the size of 12cm is available and a disc of 8cm must not be used.
Check the disc status and format because these are not failure of this unit.
2) USB function
(1) Insert a USB memory to the USB terminal.
(2) Press the SOURCE select button to select the USB mode.
(3) Total numbers of the folders and total numbers of files to play are displayed.
→ Folder : 64 folders
Track : 257 tracks
If no files to play, then “NO FILE” is displayed.
if a USB memory is not inserted “NO USB” is displayed.
(4) Select a track to playback using the SELECT button and the ENCODER switch.
- select 11 using the SELECT button and select a folder by turning the ENCODER switch.
11 can be selected only when the USB has folder.
- select I◀◀▶▶I using the SELECT button and select a track to playback by turning the the ENCODER
switch.
(5) Press the 111111 button to play.
To skip the track during playback, select I◀◀▶▶I using the SELECT button and select the track to
playback by turning the ENCODER switch.
(6) Press the 111111 button again to pause.
Press the 111111 button to stop.
※Note:
When the track which status is not good or which format is not compatible, the window displays
“PLAY ERROR”. The error track is skipped and playback the next track.