Inter-M CDR-01 - Manual (Page 11)

SD RECORDER/MULTI SOURCE PLAYER
9 CDR-01
Rear Panel Rear Panel
1. AC INLET
Connect the power cable supplied with the CDR-01.
2. RS-232C TERMINAL
This terminal allows control by a remote controller such as AMX /CRESTRON etc.
The control protocol can be downloaded from the home page. (www.inter-m.com)
3. COAXIAL OUTPUT
This terminal provides the digital audio signal in S/PDIF format.
4. OPTICAL OUTPUT
This terminal provides the digital audio signal in S/PDIF format.
5. AES/EBU OUTPUT
This terminal provides the professional digital audio signal.
※ In PITCH mode, the AES/EBU output is off.
6. ANALOG MONO OUTPUT
MONO output terminal provides the mixed signal of L and R channel outputs.
The maximum output level is +8dBu.
7. ANALOG R CHANNEL OUTPUT (XLR)
This terminal provides R channel signal output. The maximum output level is +8dBu.
8. ANALOG L CHANNEL OUTPUT (XLR)
This terminal provides L channel signal output. The maximum output level is +8dBu.
9. XLR OUTPUT LEVEL SELECT SWITCH
This switch selects the output level maximum +8dBu or +20dBu of the XLR L/R audio output.
10. ANALOG L/R OUTPUT (RCA)
These terminals provide L and R channel signal output. The maximum output level is +8dBu.
1 2 3 4 5 9
6 7 12 11 8 10