ION Audio Film 2 SD Plus - Manual (Page 6)

6
6.
Press the Film Type button to select the film type that you are using:
135 positive (slide)
135 negative
135 black & white
110 negative
126 negative
Note: Improper selection of the film type may give undesirable results.
7.
To adjust the brightness (exposure), press EV/Delete button to adjust the exposure value. Press the Up or Down
button to adjust the exposure compensation from +2EV to -2EV in 0.5 increments.
8. Capture your image by pressing the OK button.
VIEWING YOUR IMAGES
When you enter Playback Mode, your captured images will be displayed in a slideshow, allowing you to preview them.
If there are no images saved to the SD card while in Playback Mode, a "?" icon will appear on the screen.
To remove the SD card to view your images elsewhere:
1.
Turn Film 2 SD Plus off by pressing the Power button.
2. Eject your SD card by pushing it in first, then pulling it out of the slot.
3. To view your pictures, insert the SD card into an SD-compatible device, such as a digital picture frame, computer,
or television.
Note: To view your images on your TV rather than the display of Film 2 SD Plus, connect the TV OUT of Film 2
SD Plus to your TV's video input with the included TV output cable.
Viewing your images from a TV:
1.
Set your TV to the appropriate video input mode, and connect the TV cable from Film 2 SD Plus to the TV.
2. Press the Playback button on Film 2 SD Plus for viewing images on the TV.
3. Choose whether your country is using the NTSC or PAL system. (Residents of North America, Central America,
some parts of South America, and Japan should select NTSC. Most others should select PAL.)
4. Press the Up button to advance through photos and press the Down button to review previous photos.
5. Press the Playback button once again to display a photo slideshow on the TV. Stop the slideshow by pressing the
Up or Down button. Continue the slideshow by pressing the Playback button again.
6. Press the Playback button during the slideshow to exit TV mode.