IPA Tools 8005 Fuse Saver Standard Kit - Manual

MODEL #8005
10, 15, and 20 Amp
Short Circuit Diagnostic Aid
USER MANUAL
WARNING
RISK OF ENTANGLEMENT
RISK OF FIRE
RISK OF BURN
RISK OF EXPLOSION
(KEEP SPARKS AWAY FROM BATTERY)
WEAR SAFETY GOGGLES
WARNINGS
• To prevent arcing and avoid unnecessary wear that voids your warranty, always
disconnect battery before inserting the tool.
• If any arcing is found during installation or use, disconnect immediately and
recheck system.
• Do not connect to areas that have been subjected to heat from loose fuse contact
(i.e. melted plastic housing in area of fuse for the circuit to be tested).
• Do not connect to loose or corroded contacts — this can cause arcing, extreme
heat, or fire.
• Do not assume that the fuse removed is the proper rated amperage for that circuit.
Check vehicle’s Owner’s Manual for proper fuse size.
• Do not store or use in temperatures exceeding 110°F or below 40°F.
THIS TOOL IS NOT TO BE STORED OR OPERATED IN WET CONDITIONS.
Innovative Products of America ® Incorporated
888-786-7899 • 234 Tinker Street, Woodstock, NY 12498 • www.ipatools.com