AMX Modero ViewPoint MVP-8400 User Manual
Page 116
Setup Pages
102
MVP Modero ViewPoint Touch Panels
Features on this page include:
Panel Information Page
Back:
Saves all changes and returns to the previous page.
WiFi/Wired icon:
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired
(image of three networked computers).
Connection Status icon:
The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Panel Type:
Displays the model of the panel being used.
Firmware Version:
Displays the version number of the G4 firmware loaded on the panel.
Setup Port:
Displays the setup port information (value) being used by the panel.
High Port:
Displays the high port (port count) value for the panel.
High Address:
Displays the high address (address count) value for the panel.
High Channel:
Displays the high channel (channel count) value for the panel.
High Level:
Displays the high level (level count) value being used by the panel.
Serial Number:
Displays the specific serial number value assigned to the panel.
Setup Pages Version:
Displays the type and version of the Setup pages being used by the panel.
Screen Width:
Displays the screen width (in pixels).
• MVP-8400 = 800
Screen Height:
Displays the screen height (in pixels).
• MVP-8400 = 600 pixels.
Screen Refresh Rate:
Displays the video refresh rate applied to the incoming video signal from the
panel.
Screen Rotation:
Displays the degree of rotation applied to the on-screen image.
Power Up Pages:
Displays the page assigned to display after the panel is powered-up.
Start Up String:
Displays the start-up string.
Wake Up String:
Displays the wake up string used after an activation from a timeout.
Sleep String:
Displays the sleep string used during a panel’s sleep mode.
File System:
Displays the amount of Compact Flash memory available on the panel.
RAM:
Displays the available RAM (or Extended Memory module) on the panel.
Panel Start Time:
Displays the last time the panel booted.