AMX Modero ViewPoint MVP-8400 - Manual (Page 120)

Setup Pages
106 MVP Modero ViewPoint Touch Panels
Environmental acoustics, personal voice level and ambient noise are all deciding factors when setting
your mic and panel sound levels. Consider your environment when adjusting sound levels and use
caution so as not to damage the speaker.
WAV files - Supported sample rates
The following sample rates for WAV files are supported by MVP-8400 panels:
Custom Sounds
The custom button hit/miss sound feature allows a user to add one custom button hit and one custom
button miss sound to any user page project. Once the user page is downloaded into the panel, the user
can select the custom sounds from the Audio Setup page.
To add custom sounds to a TPDesign project, import a WAV file into the resource manager. Rename the
resource to "customSingle.wav" for a custom button hit sound or "customDouble.wav" for a custom
button miss sound.
Volume Page (Cont.)
Master Volume: This section allows you to alter the current master volume level:
• Use the UP/DN buttons to adjust the volume level (range = 0 - 100).
• The Master Volume bargraph indicates the current volume level.
• The Mute button toggles the Mute feature.
Default = 50
Digital Audio Level: Adjusts the volume level on the panel’s internal speaker:
• Use the UP/DN buttons to adjust the volume (range = 0 - 100)
• The Internal Sound Level bargraph indicates the current sound level
• The Mute button mutes the internal speaker volume
Default = 50
Panel Sounds: • Activating the Button Hit button plays a default sound when you touch an
active button.
• Activating the Button Miss button plays a default sound when you touch a
non-active button or any area outside of the active button
• The Play Test Sound button plays a test WAV/MP3 file over the panel’s
internal speakers.
• The singlebeep01 button plays the default single-beep file.
• The doublebeep03 button plays the default double-beep file.
• The Panel Docking Tone Enabled button enables or disables sound when
the panel is in a docking station or cradle.
• The Information button opens a popup explaining procedures for using the
Button Hit, Button Miss, and Panel Docking Tone Enabled buttons.
Supported WAV Sample Rates
• 48000 Hz • 16000 Hz
• 44100 Hz • 12000 Hz
• 32000 Hz • 11025 Hz
• 24000 Hz • 8000 Hz
• 22050 Hz