Joyce DIA201 - ACME 1 diameter, .25" pitch, .50 lead"" User Manual
Page 3
3
Section I
General Information
1-1 Contact Joyce Dayton Corp.
Joyce Dayton Corp.
P.O. Box 1630
Dayton, OH 45401
(800) 523-5204 (US and Canada only)
(937) 294-6261
(937) 297-7173 Fax
Email:
Website: www.joycedayton.com
1-2 Purpose and Scope
This manual provides installation, operation and maintenance instruction for the standard Joyce
Dayton integrated actuator with acme screw. Although this manual covers the standard integrated
actuators, some may vary significantly from this manual. For special units, please contact Joyce
Dayton Corp. for assistance.
1-3 Receipt of Product
All equipment should be immediately inspected upon receipt for any damage and to verify correct
product and quantities. Any problems should be reported to Joyce Dayton Corp. and the freight
carrier as soon as possible. Products returned without a Return Goods Authorization (RGA) form
will not be accepted.
1-4 Warranty
Seller warrants its products to be free from defects in material and workmanship under normal
and proper use in accordance with instruction of seller for a period of one year from the date of
shipment to buyer. Seller's liability under such warranty or in connection with any other claim
relating to the products shall be limited to the repair, or at seller’s option, the replacement or
refund of the purchase price, of any products or parts or components thereof which are returned
to seller freight prepaid and which are defective in material or workmanship. Products or parts or
components thereof, which are repaired or replaced by seller will be returned to buyer freight
collect. This warranty is not intended to cover consumer products, as defined in the Magnuson-
Moss Warranty-Federal Trade Commission Improvement Act, 15 U. S. C. Sections 2301-12,
which are purchased by buyer for purposes other than resale. If buyer is not intending to resell the
products, and if the products are consumer products as defined in the Magnuson-Moss Act, the
foregoing warranty, but not the limitation of seller's liability, shall be null and void. EXCEPT AS
EXPRESSLY STATED ABOVE, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
WHETHER OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR
USE OR OTHERWISE, ON THE PRODUCTS, OR ON ANY PARTS OR LABOR FURNISHED
DURING THE SALE, DELIVERY OR SERVICING OF THE PRODUCTS.
1-5
Precautions of Use and Installation
1. Mechanical stops provided on the integrated actuators are not designed for use as end-of-
travel stops. The customer is responsible for setting travel limits.
2. Travel can be limited using optional limit switches. These limit switches need to be set by the
customer. In most applications, factory or manufacturer-assisted installation is not required.
However, it is necessary that appropriate, qualified personnel perform the installation of Joyce
Dayton products.
3. Joyce Dayton integrated actuators are not rated for shock-loading or extreme vibration. It is the
responsibility of the user to ensure these conditions are not imposed on the actuator.
4. In the event that service or maintenance is required, the load must be secured or removed
before any work can begin.