ADC UltraWAVE CDMA Pico BS Plus - Manual (Page 2)

Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106403AE 6/08 Original © 2008 ADC Telecommunications, Inc. All Rights Reserved
Spec
Sheet
Specifications
CAPACITY
Voice Channels:
Up to 32 reverse CE per FA and up to 64 forward CE per FA
Data Speed: Up to 153 kbps (RC3 and RC5)
CONFIGURATIONS
BSC:
Performs BSC functions excluding voice coder and echo canceller
BTS: Omni, 1 FA
Omni, 2 FA
RADIO
Air Interface:
IS-95A/B, CDMA 2000 1xRTT 3GPP2 Release 0
Frequency Band: 800 MHz, 1900 MHz
Transmit Power: 100 mWatt output power at antenna port per FA
Receive Diversity: Supported
Configurations: RC1, RC2, RC3, RC4, RC5 in forward link
RC1, RC2, RC3, RC4 in reverse link
INTERFACE
IP Network Interface:
10/100 Mbps Ethernet, RJ-45 port
Signaling Protocol: IOS4.0.1 over IP
Management: SNMPv2 MIBs
Serial: RS-232, RJ-45 port
OPERATION
Synchronization:
Generated by a Stratum 2 0CX0 master clock generator
Synchronized from built-in GPS receiver
Administration: System provisioning, SW download, alarm collecting, reporting
and performance statistics
Field Support: Local diagnostic and configuration terminal via 10BaseT Ethernet
POWER SUPPLY
Input Voltage:
-48 VDC
Optional 110 to 220 VAC
Power Consumption: 1 FA, 1 Sector: 75 Watts
MECHANICAL
Dimensions (HxWxD):
12" x 12.5" x 5.5" (30.48 x 31.75 x 12.7 cm)
Weight: 15 lbs. (6.8 kg)
Operating Environment:
Operating Temperature:
0° to 50°C (32° to 122°F)
Humidity (non-condensing): 10% to 90% at 35°C (95°F)
COMPLIANCE: FCC Part 15 and 22 ; UL 60950, CE