LA STEELCRAFT EC60 User Manual
Model ec60
12" - 14 gauge spun aluminum ball
gold anodized
Double sheave truck, cast aluminum
revolving, non-fouling type
3 Bronze swivel snap with covers
per halyard
1 Set of halyards: #10 poly
1 - 9" Cast aluminum cleats
Aluminum flash collar
3000 PSI concrete
Hardwood wedges
(supplied by others)
Dry sand tightly tamped
after aligning pole
Foundation sleeve -16 ga
hot dip galvanized steel
Steel centering wedges
1/4" Steel base plate
1/4" Steel support plate
welded to grounding spike
All shafts with overall
length of more than
38'-6" are shipped in
two sections.
Each section matched marked
for field assembly. Exposed
portion of jam sleeve must
be
well lubricated prior to
assembly.
1-1/2" maximum shop
gap allowed for field fitting
(ram for tight joint)
Tapered portion: 53'-4"
Straight portion: 12'-8"
Project:
Location:
Architect:
Contractor
Customer:
Date:
Revision:
Job:
Overall length: 66'-0"
Foundation: 6'-10"
Cleat height: 5'-0"
Model EC60
Truck Detail
Revolving, non-fouling truck
Cast aluminum body
Stainless steel ball bearings
Nylon sheaves
Cast aluminum spindle
12"
24"
72"
10"
14"
Exposed height: 60'-0"
Ground set tapered aluminum flagpole: ALLOY: 6063T6
Exposed height: 60'-0"
Overall height: 66'-0"
Ship in 3
sections
Butt diameter: 12"
Top diameter: 4"
Wall thickness: .250"
Finish: 100 grit polish
6'-0"