LED LENSER H14R.2 User Manual

Page 5

Advertising
background image

04

GB

again and the charging cable (micro-USB) of the

Accumulator-pack. But it is no problem to go

on loading the Accumulator-pack although it is

already full.

Instead of connecting the charging cable to the

USB port of the charger, you can also connect

it to a different USB port (5 V / 900 mA) e.g. of a

computer.

While using our optionally available car USB

charger connection (Led Lenser Car Charger:

Item no. 0380), the H14R.2 also can be charged

at the cigarette lighter and sockets in vehicles.

These accessory units match themselves

automatically to the respective input voltage

(12 V ó 24 V). These alternatives are suitable to

charge the Accumulator-pack in case a power

outlet is not available.

Note – Please ensure that there is no short-

circuit at the charging contacts. The charging

contacts may not be touched with moist or

metallic objects.

10. Charge indications

In case you are charging the Accumulator-Pack

of the H14R.2 with the corresponding charger

and charging cable respectively by a USB port

(see Point 9) the status LED at it glows while

charging in red and the light changes to green

when the charging is completed. The white LED

of H14R.2 couldn’t use while charging.

11. Changing of the Accumulator-Pack / Li-ion-

Accumulator / Alkaline batteries

Prior to the change, please turn off the H14R.2.

On the button side of the head lamp battery box

there is the gate of the battery box. Open the

battery box rear cover, remove the battery, and

then insert a new one.

Also alkaline batteries can be inserted. But then

the charger cannot be used!

During insertion, it is always necessary that

this is in the correct direction. Therefore, pay

attention to the polarities (+ and -) both in the

battery box and also on the Accumulator-Pack

/ alkaline batteries. Otherwise, the hypothetical

risk that Accumulators / batteries are damaged

and may explode.

The supplied Accumulator-Pack can only be

recharged with the original charger or by a USB

port (see Point 9)!

After replacing the cover of the battery box has

to be closed again.

12. Headband

The headband can be washed, and please refer

to the picture about how to disassemble and

assemble the headband.

13. Rechargeable batteries / Accumulators

Non rechargeable batteries or other

accumulators that are not of the same type as

the accumulator that is scope of delivery are not

allowed to be charged by the charger. Never use

non rechargeable batteries and accumulators

together. Change always all non-rechargeable

batteries and accumulators at the same time.

Use in the H14R.2 below batteries can be used

4 x AA alkaline / 4 x AA Ni-MH / 4 x CR123A

Lithium batteries / 4xCR123A rechargeable

Lithium batteries / 2 x ICR 18650 batteries / Li-

ion battery pack.

If you intend not to use the item for an extended

period, please take out the Accumulator-Pack

respectively the NiMH-Accumulators / alkaline

batteries in order to avoid damage.

Used batteries and accumulators have to be

taken out the item and disposed of in keeping

with the national laws.

13. Disposal for rechargeable batteries and

non-rechargeable batteries

Basically, the possibility of short-circuits of

accumulators and batteries must be eliminated

and they may neither be opened, nor enter the

human body in any way, nor may they be thrown

into a fire.

14. Cleaning

For cleaning, please use a dry, lint-free, clean

cloth.

If salt water is spilled on the head lamp, it must

be immediately entirely removed with such a

cloth.

The headband can be washed in a washing

machine at 30 °C.

15. Scope of delivery

The H14R.2 incl. headband is supplied with the

following accessories:

1xH14R.2 headlamp;

1xcharger and plug;

1xUSB cable, connect the rechargeable battery

and charger for charge;

1xLi-ion battery pack;

1x user manual.

16. Caution

Do not swallow any small parts or batteries/

accumulators that are present. The products

or parts thereof (including batteries /

accumulators) must be stored outside the reach

of children.

For reasons of safety and approval (CE), the

product must not be modified and/or changed.

The product is to be used exclusively as an

accumulator or battery powered lamp. If the

H14R.2 is used for any other purpose, or used

incorrectly, it can get damaged and hazard-

free use is not guaranteed any more (danger

from fire, short-circuit, electric shock etc.).

There is then no liability for harm to persons

or damage to property, and the warranty of the

manufacturer is also rendered null and void.

The temperature range in which the H14R.2

can be operated is -20 C° to +50 C°. Ensure that

the H14R.2 is not subjected to more extreme

temperatures, intense vibrations, explosive

atmosphere, solvents and / or vapors. Also

continuously exposed to direct sunlight, high

humidity and/or moisture have to be avoided.

Changes, repairs and maintenance over and

above those described in the documents

accompanying the product may only be carried

out by authorized technical personnel.

Once it is found that the product is filled with full

batteries / accumulators in correct orientation

(polarity!) and correctly closed, but nonetheless

a normal, safe operation is not possible or the

product shows damage, it must be rendered

inoperative and not used any further. In this

case, for warranty matters, contact your dealer.

17. Safety instructions

This product is not a children's toy.

Advertising