LEESON SM-Basic Series Sub-Micro Inverters (Obsolete) - Manual (Page 5)

1
1.0 GENERAL
1.1 PRODUCTS COVERED IN THIS MANUAL
This manual covers the Leeson Electric Corporation SM-Basic Series
Variable Frequency Drive.
1.2 PRODUCT CHANGES
Leeson Electric Corporation reserves the right to discontinue or make modifications to the
design of its products without prior notice, and holds no obligation to make modifications to
products sold previously. Leeson Electric Corporation also holds no liability for losses of any
kind which may result from this action.
1.3 WARRANTY
Leeson Electric Corporation warrants the SM-Basic AC motor control to be free of defects in
material and workmanship for a period of twelve months from the date of sale to the user, or
eighteen months from the date of shipment, which ever occurs first. If an SM-Basic motor
control, under normal use, becomes defective within the stated warranty time period, contact
Leeson Electric's Service Department for instructions on obtaining a warranty replacement
unit. Leeson Electric Corporation reserves the right to make the final determination as to the
validity of a warranty claim, and sole obligation is to repair or replace only components which
have been rendered defective due to faulty material or workmanship. No warranty claim will be
accepted for components which have been damaged due to mishandling, improper installation,
unauthorized repair and/or alteration of the product, operation in excess of design specifications
or other misuse, or improper maintenance. Leeson Electric Corporation makes no warranty
that its products are compatible with any other equipment, or to any specific application, to
which they may be applied and shall not be held liable for any other consequential damage or
injury arising from the use of its products.
This warranty is in lieu of all other warranties, expressed or implied. No other person, firm or
corporation is authorized to assume, for Leeson Electric Corporation, any
other liability in connection with the demonstration or sale of its products.
1.4 RECEIVING
Inspect all cartons for damage which may have occurred during shipping. Carefully unpack equipment
and inspect thoroughly for damage or shortage. Report any damage to carrier and/or shortages to
supplier. All major components and connections should be examined for damage and tightness, with
special attention given to PC boards, plugs, knobs and switches.
1.5 CUSTOMER MODIFICATION
Leeson Electric Corporation, its sales representatives and distributors, welcome the opportunity
to assist our customers in applying our products. Many customizing options are available to aid
in this function. Leeson Electric Corporation cannot assume responsibility for any modifications
not authorized by its engineering department.