LevelOne FCS-8006 - Manual (Page 85)

Intelligent Surveillance Solution
LevelOne IP CamSecure
- 84 -
Options: Adjust the setting only when the server is stopped.
 Port: Assign a port for the clients to connect to your system via Remote Live Viewer. Default port is 5150.
 Maximum Connections: Number of connections that are allowed to connect to the system. Default is 16
channels and maximum is 128, one camera video counts as one connection.
 Use Default Web Server: Activate the Web server by checking the box; clients will be able to watch live
video via Internet Explorer. The port for live streaming server is set to 80 by default.
Note: This must be checked in order to access system via IE*.
 Save Log: Save the log information at appointed folder.
 Enable Audio: Select this option to enable the audio transmission along with video stream.
Black / White List
 White List: Check the “Enable White List” box to activate the white list filter. Only IP from the white list is
allowed to log in.
 Black List: Check the “Enable Black List” box to activate the black list filter. IP from the black list will be
blocked.
 IP Address: Enter an IP address into the IP address field on the left. To add an IP address range to the
system, enter 2 sets of IP address to indicate a series of IP(s).
 Add/Delete: Add the IP(s) onto the list or remove it from the list.
 Apply to All Network Servers: Apply the settings to both the live streaming server and the remote
playback server.
Black/ White
list
IP address
Enable list
Apply to all