LevelOne WNC-0305USB - Manual (Page 8)

Connecting to a Wireless Network
Double-click the icon to open the Site Survey screen, when you can select the Wire-
less network you wish to join.
Auto Connect
Normally, this option should be enabled. The adapter will then connect to an available
network which was connected successfully last time.
There are various methods to specify the required network.
• On the Profile Manager tab, select the desired profile in the list, and click the
Apply Profile button.
• On the Site Survey tab, either double-clicks the network in the list, or selects the
network and click the Connect button.
•
Site Survey Screen
This screen is displayed when you double-click the system tray icon. You can also
click the Site Survey Tab in the screen.
Figure 7: Site Survey Screen