LevelOne WPC-0600 - Manual (Page 21)

N_One Wireless CardBus Adapter
Fragment
Threshold The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
RTS/CTS
Threshold The default value is 2346. In some cases, you may be able to
improve performance by adjusting this value.
802.11n
Enable 802.11n
Network 802.11n wireless network connectivity
Channel Width The value is set as “Auto”
Guard Interval This value is set as "Auto"
Extension
Channel Auto selects the wireless channel. The value is set to “Auto” It
will auto select the most suitable channel.
Antenna Selection The default value is set to "Auto".
WPS Function Screen
The Wi-Fi Protected Setup (WPS) is to simplify the security setup and management of
Wi-Fi networks. WPS (Wi-Fi Protected Setup) allows consumers to protect their home
networks by using the push button configuration on the router, or entering an 8-digit
PIN code if there's no button.
You will see the WPS screen when you try to connect the wireless network with the
WPS function.
Figure: WPS Function Screen
17