LevelOne GES-1652 - Manual (Page 27)

Web Smart Switch
27
LABEL DESCRIPTION
MAC Address
Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs. Static MAC addresses do not age out.
VLAN Enter the VLAN identification number the MAC address belongs to.
Type
There are two types of MAC entry:
 Unicast: add a unicast MAC entry.
 Multicast: add a multicast MAC entry.
Port
If Type is unicast, select the port number of the MAC entry;
If Type is multicast, select the port list of the MAC entry.
Add Click Add to add any port into the static MAC address table.
No. This is the index number for the MAC address forwarding entries.
Delete To delete any selected MAC address entries.
3.2 Network
Use the Network pages to configure settings for the switch network interface and how the switch
connects to a remote server to get services.
3.2.1 IP Address
Use the IP Setting screen to configure the switch IP address and the default gateway device. The
gateway field specifies the IP address of the gateway (next hop) for outgoing traffic.
The switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
Click Network > IP Address in the navigation panel to display the screen as shown below.