LevelOne FGL-2870 - Manual (Page 419)

System Management Commands
4-53
4
terminal length
This command sets the number of lines displayed on a terminal. Use the no form to
restore the default setting.
Syntax
terminal length screen-length
no terminal length
screen-length – The number of lines displayed on a terminal.
(Range: 0-512, where 0 means no pause for output displays)
Default Setting
24
Command Mode
Privileged Exec
Example
terminal width
This command sets the number of characters displayed across a terminal. Use the
no form to restore the default setting.
Syntax
terminal width characters
no terminal width
characters – The number of characters displayed across a terminal.
(Range: 0-80)
Default Setting
80
Command Mode
Privileged Exec
Example
Console#terminal length 20
Console#
Console#terminal width 70
Console#