LevelOne GSW-4876 - Manual (Page 154)

C HAPTER 4 | Configuring the Switch
MLD Snooping
– 154 –
Fast Leave does not apply to a port if the switch has learned that a
multicast router is attached to it.
Fast Leave can improve bandwidth usage for a network which
frequently experiences many MLD host add and leave requests.
◆ Throttling - Limits the number of multicast groups to which a port can
belong. (Range: 1-10; Default: unlimited)
MLD throttling sets a maximum number of multicast groups that a port
can join at the same time. When the maximum number of groups is
reached on a port, any new MLD listener reports will be dropped.
W EB I NTERFACE
To configure global and port-related settings for MLD Snooping:
1. Click Configuration, IPMC, MLD Snooping, Basic Configuration.
2.
Adjust the MLD settings as required.
3. Click Save.
Figure 58: Configuring Global and Port-related Settings for MLD Snooping
C ONFIGURING VLAN
S ETTINGS FOR MLD
S NOOPING AND Q UERY
Use the MLD Snooping VLAN Configuration page to configure MLD snooping
and query for a VLAN interface
P ATH
Advanced Configuration, IPMC, MLD Snooping, VLAN Configuration
P ARAMETERS
These parameters are displayed:
◆ VLAN ID - VLAN Identifier.