LevelOne IES-1081 - Manual (Page 7)

IES-1081 User Manual Page 7
Functional Description

Complies with EN50121-4 environmental requirements for railway applications.

Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and
vibration for traffic control equipment.

Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial
environment.

Manageable via SNMP, Web-based, Telnet, and RS-232 console port.

Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation:
1000Mbps-full-duplex; 10/100Mbps-full/half-duplex; Auto MDI/MDIX.

100Base-FX: Multi mode SC or ST type, Single mode SC or ST type. 100Base-BX: WDM
Single mode SC type.

1000Base-SX/LX: Multi mode SC type, Single mode SC type. 1000Base-BX: WDM Single
mode SC type.
 Supports 8192 MAC addresses. Provides 2M bits memory buffer.

Store-and-forward mechanism.

Full wire-speed forwarding rate.

Alarms for power and port link failure by relay output.

Power Supply: Redundant DC Terminal Block power inputs and 12VDC DC JACK with
100-240VAC external power supply.

Operating voltage and Max. current consumption: 0.92A @ 12VDC, 0.46A @ 24VDC,
0.23A @ 48VDC. Power consumption: 11W Max.

-40℃ to 75℃ (-40℉ to 167℉) operating temperature range. Tested for functional
operation @ -40℃ to 85℃ (-40℉ to 185℉).

Supports DIN-Rail and Panel Mounting installation.
Console Configuration
 Connect to the switch console:
Connect the DB9 straight cable to the RS-232 serial port of the device and the RS-232
serial port of the terminal or computer running the terminal emulation application.
Direct access to the administration console is achieved by directly connecting a
terminal or a PC equipped with a terminal-emulation program (such as HyperTerminal)
to the switch console port.
 Configuration settings of the terminal-emulation program:
- Baud rate: 115,200bps
- Data bits: 8
- Parity: none
- Stop bit: 1
- Flow control: none
 Press the Enter key. The Command Line Interface (CLI) screen should appear as below:
 Logon to Exec Mode (View Mode):
Mode (or View Mode). > reen.