LevelOne GVS-3800 - Manual (Page 29)

23
Ingress Filter:
Enable or Disable VLAN ingress filter.
Application 1 description:
Example for Replace Vlan description:
Topology:
Application 1 Scenario explain:
Switch A VLAN setting:
Port 1 ~ 4: members of VLAN 2 group (PVID: 2)
Port 1 is trunk mode, port 2~4 is access mode.
Switch B VLAN setting:
Port 5 ~ 8: members of VLAN 10 group (PVID: 10)
Port 5 is trunk mode .port 6~8 is access mode.
Purpose: Client A & B can communicate with each other (and don’t changed
original setting on Switch A & B)
How to setting on Converter A & B?
Step1.
Pls add VLAN 2 & 10 entry on the table, and confirm port members are
selected.
(The same VLAN group setting on Converter A & B)
Fig. 3-11-1
Converter A Converter B