LevelOne WAP-3000 - Manual (Page 31)

Security
This page is where user configures the security features supported by this Access Point.
Password: Allow user to change the new login password. Here are the necessary steps:
1. Enter the new password in the “AP Password New:” field.
2. Enter the new password again in the “Confirm” field.
3. Click “Apply”
MAC Filter: MAC Filter function controls the MAC of the network devices that are listed in this table
for access authorization or denial. There have three choices:
‹ Disable MAC Filters
‹ Only allow PCs with MAC listed below to access device
‹ Only deny PCs with MAC listed below to access device
The maximum number of MAC addresses that can be stored is 50. User can browse through the
MAC address saved by selecting the MAC Filter List.
For any changes made in the security page, click “Apply” for the changes to be effective.
28