LevelOne WAP-6013 - Manual (Page 34)

34
Association control Check "Association control" to enable the
controlling of which wireless client can
associate to the wireless LAN. If a client is
denied to associate to the wireless LAN, it
means the client can't send or receive any data
via this device. Choose "allow" or "deny" to
allow or deny the clients, whose MAC
addresses are not in the "Control table", to
associate to the wireless LAN.
Control table
"Control table" is the table at the bottom of the "MAC Address
Control" page. Each row of this table indicates the MAC address
and the expected IP address mapping of a client. There are four
columns in this table:
MAC Address MAC address indicates a specific client.
IP Address Expected IP address of the corresponding
client. Keep it empty if you don't care its IP
address.
C When "Connection control" is checked,
check "C" will allow the corresponding
client to connect to this device.
A When "Association control" is checked,
check "A" will allow the corresponding
client to associate to the wireless LAN.
In this page, we provide the following Combobox and button to help you to input the MAC
address.