LevelOne WAP-6150 - Manual (Page 25)

25
However, not all the APs can be set to enable the Lazy mode simultaneously; at
least there must be one AP with all the WDS peers ’ MAC address filled.
2. Green AP: Enable the Green AP function to reduce the power consumption
when there is no wireless traffics.
3. Channel: The radio channel number. The permissible channels depend on the
Regulatory Domain. The factory default setting is auto channel selection.
4. Authentication & Encryption: You may select one of the following
authentications to secure your wireless network: Open, Shared, Auto, WPA-PSK,
WPA, WPA2-PSK, WPA2, WPA-PSK/WPA2-PSK, or WPA /WPA2.
5. Remote AP MAC 1 ~ Remote AP MAC 4: If you do not enable the Lazy mode,
you have to enter the wireless MAC address for each WDS peer one by one.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.3.1.4 Universal Repeater Mode
Universal Repeater is a technology used to extend wireless coverage. It provides the
function to act as Adapter (Client) and AP at the same time and can use this function
to connect to a Root AP and use AP (SSID name must be the same as that of Root
AP) function to service all wireless stations within its coverage. All the stations within
the coverage of this access point can be bridged to the Root AP.