Netware setup – LevelOne FPS-1032 User Manual
Page 42
42
IP Address: This option allows you to input IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment.
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly
recommended.
Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
Default Router: This option allows you to input gateway from the print server. This IP
address of gateway must meet the router or gateway to go across of the
network segment.
NetWare Setup
1.
Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2.
Select NetWare and type in the Print server that created during PCONSOLE Select
the NetWare File Server to which the print server device will be attached.
3.
Click Setup, it then appears the sub-menu.
4.
Click NetWare, it then as shown in the following picture.