LevelOne IED-1020 - Manual (Page 45)

Auto-mapping a COM port
User can use the Xport utility to automatically map a serial port to a COM port on a PC. The
serial port on the Serial Device Server has to be set to Virtual Com mode when mapping COM
port with Xport utility.
1. Map successfully: The serial port on the Serial Device Server has been successfully
mapped to a COM port on a PC.
Fig 53. Auto-mapping a COM port
2. COM List: Click right button of mouse on the COM port to show as Fig 54.
Fig 54. COM List
3. Modify Setting: User can modify Network setting and Serial setting of COM port settings as
Fig 55. and Fig 56.
 Network setting:
Remote IP address: Input the IP address of the remote Serial Device Server.
TCP port: Choose TCP port number assigned to the COM port. The default TCP port number
is 601.
Active auto-reconnect: Check this option to support Active auto-reconnect. The Xport utility
will automatically attempt to reconnect COM port to the serial port on the Serial Device Server.
Reconnect interval: The Xport utility will automatically attempt to reconnect COM port to the
serial port on the Serial Device Server in defined time interval (Reconnect interval). The default
Reconnect interval is 1000ms.
Cache data when connection was broken: Check this option to ensure that data is buffered
if the connection is broken.