LevelOne HVE-9001 - Manual (Page 7)

6
HVE-9002 HDSpider™ HDMI Cat.5 Sender + 1 HDMI Out
1. Power indicator
2. DIP switch: 1=OFF: Use default EDID;
1=ON: Learn EDID from the display;
2=OFF: HDMI with 8-channel audio mode;
2=ON: HDMI with 2-channel audio mode
3. HDMI In: Connect a HDMI source with a HDMI M-M cable here
4. Audio out: Plug in a local speaker here
5. HDMI Out: Connect to a HDMI display with a HDMI M-M cable here
6. RJ-45 Out: Link to HVE-9003 for cascading; or link to HVE-9000 or HVE-9900 to
another HDMI display with a Cat.5e/6 cable
7. +5V DC: Connect to 5V 4A DC power supply
Note
1. Don’t plug in HDMI cable to HDMI In while processing writing default EDID or writing display
EDID.
2. The LED next to the rotary control knob turns off when the writing process is completed.
3. The HVE-9002 reads the EDID information from the HDMI socket of the connected HDTV, so
please connect the display from which you want to read EDID to HDMI Out.
1 2 3 4 5 6 7