Levenhuk 3L NG Microscope - Manual (Page 8)

General information
The microscope is safe for health, life and property of the consumer and the environment when properly
used; the microscope meets the requirements of international standards. The microscope is designed for
observing transparent objects in the transmitted and reflected light using the bright field method, for
biological use and teaching demonstrations.
Levenhuk DEM 130 digital camera was exclusively designed for use with this microscope. It allows transfer
of the precise image of the observed object to your PC display. ScopePhoto software is included in the
package; it allows viewing and editing of the received images.
Specification
Magnification 64х-640х
Magnification of objective 4x, 10x, 40x
Eyepiece magnification 16х
Linear field in the images space 18 mm
Tube length 160 mm
Stage dimensions 95х95 mm
Stage moving range 0-15 mm
Power supply AC adapter
Illumination (upper/lower light) LED
Camera model DEM135
MAX resolution (at rest) 640x480
Megapixels 0.3
Sensor 1/4" CMOS
Pixel size 6μm X 6μm
Sensitivity, v/lux-sec @550 nm 2.0
Speed (depends on the PC model) 30 fps
Video recording Yes
Active range 60dB
Location ocular tube (not eyepiece)
Image format BMP, TIFF, JPG, PICT, SFTL etc.
Field of view diameter 18 mm
Spectral range 400-650 nm
Programmable options Image size, brightness, white balance, exposure
control, etc.
Slot USB 2.0, 480 Mb/s
System requirements Windows 2000/XP(SP2)/2003/Vista; USB port
Software USB 2.0 driver, ScopePhoto
Power supply via USB cable
Temperature range -30...70 °C
Legend
1
Eyepiece
2
Monocular nosepiece
3
Revolving head
4
Objectives
5
Focusing knob
6
Stage
7
Lower
illumination 8
Base stand
9
Stand
10
Upper illumination
11
Slide holders
12
Diaphragm disk
13 USB port 14 Digital camera 15 USB cable 16 Adapters 17 Setup CD
www.levenhuk.com
English