Airlink101 AMPS230 - Manual (Page 8)

8
2.3 Configuring the Printer Server
Note: The following steps only need to be performed one time from one computer.
Step 1 Click the Discover button and your printer should show up under Server Name.
If your print server does not show up, check all power and network cable connections to
the printer. You may also need to disable any software firewalls you have on your
computer.
Step 2 Once the printer server appears in the Server Name box, click on it. You should
see your printer next to Device name. Click on the Setup Wizard button.
Step 3 A password box will appear. The default password is admin. Enter it and click
OK.