LockeyUSA 2985 - Manual (Page 2)

Lockey® 2900 Series
2900 | 2950 | 2930 | 2945 | 2985
Installation Instructions & Template
HANDING INSTRUCTIONS (2930, 2945, 2985)
IMPORTANT: DO NOT REMOVE CAM FROM LATCH WHEN CHANGING HANDING
Change Latch Handing
1. Remove screws from both sides of latch casing.
2. Remove Cover and interior springs. (Parts #1, #2, #3)
3. Remove Latch and Deadlatch. (Parts #4 and #8)
4. Carefully remove Latch Pin (#7), and Latch Spring (#6). CAUTION – Spring under tension.
5. Replace the Latch Spring and then move the Deadlatch Activator (#5) to the opposite side of
the latch ensuring that it depresses the Latch Spring. Replace the Pin.
6. Replace Latch, Deadlatch, Latch Springs and Cover.
7. Secure screws on each side of Latch Casing.
Remove screws
from both sides
of latch casing.
#8 Latch
#7 Latch Pin
#6 Latch Spring
#4 Deadlatch
#5 Deadlatch Activator
#3 Large Spring
#2 Small Spring
#1 Cover