Aiphone JB-2MED - Manual (Page 11)

- 11 -
7-10
JB-2MED
TALK
CALL
MONITOR
REC PLAY SET
01/APR/04 14:30
SET SET
2/5
1
3
2
2/5
JB-2MED
TALK
CALL
MONITOR
REC PLAY SET
SET SET
JB-2MED
Absence set (Auto absence recording) English
1. If the SET button is pressed once (less than 2 sec.), it will
light and the unit will be set.
2. If the absence set (auto absence recording) is operating,
the SET button flashes to show that there has been a caller
(if the image is played, it goes back to being lit). When the
image is played, the number of callers who came while you
were out is displayed. Example: 2/5" means Second image
from a total of 5.
3. Press the SET button again to cancel. The SET button light
will go off.
. In step 1, if pressed and held for more than 2 sec., it will
enter setting mode.
NOTES: Cancellation in step 3 is not possible while the SET
button is flashing. First play the recorded screen.
7-11
29/MAR/04 20:03
30/MAR/04 09:48
30/MAR/04 20:25
01/APR/04 15:30 01/APR/04 17:15
[1] [2] [3]
JB-2MED
Automatic updating function for recorded screens English
If the number of recorded pictures exceeds the maximum
number set for recording mode, the oldest picture is
automatically replaced with the new picture (pictures are
erased even if they have not been played).
[1] Adding new picture
[2] Number of pictures set for recording mode
[3] Erasing the earliest taken picture
NOTES: You can save pictures that you want to keep. (P23)
7-12
01/APR/04 14:30
16-picture, 4-frame mode 16/32/60-picture mode
JB-2MED
TALK
CALL
MONITOR
REC PLAY SET
JB-2MED
TALK
CALL
MONITOR
REC PLAY SET
PLAY
REC
1
2
3
01/APR/04 14:30 01/APR/04 13:25 01/APR/04 10:18
01/APR/04 14:30
JB-2MED
Play English
1. Press the PLAY button to view the newest picture.
2. Each time the PLAY button is pressed, it moves to the next
picture that was previously recorded. After the final picture,
it becomes a blue screen before returning to the first
picture. Press the REC button to reverse the selection
direction.
3. Press the TALK button to end. It ends automatically
approx. 1 min. after the final operation.
1. In step 1, playback is not possible if there are no
recorded pictures.
2. In 16-picture/4-frame mode, the REC button in step 2 is
used to view each picture in a full-screen view.