Southern Folger 50HBM DEADLATCH - Manual

FA Rev. 02-10 A9
For more information, please call 210.533.1231.
Description______________
Series 50HBM Deadlatches are lever
tumbler, motor-operated locks for
sliding doors, utilizing hookbolts. Specify
keying as follows:
51 Keyed case side
52 Keyed cover side
56 Keyed both sides
Applications_____________
Jamb-mounted 50HBM locks should be
specified for maximum security cell,
corridor, sallyport, or entrance/egress
sliding doors. May be installed within a
lock pocket or full height column. They
are designed to be part of an electrical
locking/unlocking system to provide
institutional staff with maximum safety
and flexibility of operation.
Operations______________
All 50HBM locks are operated by electric
motor. The choice of two motor
operations provides a variety of
functions:
Full-Rotation Motor (50HBM)
with latchback (1):
Unlocks when the motor is energized by
a momentary contact switch. Once
unlocked, the hookbolt is held
mechanically in the raised position until
the door is opened. It then returns to
normal, lowered position.
Two-Position Motor (50HBMC)
without latchback (2):
Same as above, except that the
hookbolt is raised and lowered as the
motor runs. A door starter should be
installed in the track housing to push
the door open when the motor reaches
the unlocking point.
Testing__________________
50HBM locks have been tested for over
1,000,000 operations.
Standard Features_______
s Motor voltage – 120VAC
s External mounting – Locks install
without cover plate removal. External
slotted mounting holes simplify
installation and allow for variations in
door gap by permitting lateral
movement.
s Two-piece plug connector –
Simplifies wiring at time of installation
and allows pre-wiring at the lock
pocket.
s Superior durability – Working parts
are stainless steel and designed for
maximum strength and corrosion
resistance.
s Hardened hookbolt and deadlock
actuator – Zinc plated for corrosion
resistance.
s Motor operation – A choice of two
operations is available, as shown on
following page.
s High security – Choice of five or six
lever tumbler models. Six tumbler
model offers greater pick resistance.
s Mechanical unlocking by key –
Once unlocked by key, the hookbolt
remains in that position until relocked
by key (Models without latchback
feature). Key is removable in the
unlocked position.
s Indication switch – The indication
switch monitors the deadlock lever to
indicate a deadlocked hookbolt.
s Finish – Zinc plated.
FOLGER ADAM ELECTRIC LOCKS Key: Prison Paracentric
Door: Sliding
Security
Level:
Maximum
50HBM DEADLATCH