Southern Folger 10300MD-NL-GIC ADTEC 2104 RETROFIT MOTOR OPERATED ELECTRO-MECHANICAL DEADLATCH - Manual

10300MD-NL-GIC-1: KEYED ONE SIDE
10300MD-NL-GIC-2: KEYED BOTH SIDES
APPLICATION:
Minimum and medium security swinging
doors that are to be unlocked from a
remote location. Jamb mounted.
Door position indicator switch, door
closer and heavy duty door pull are
recommended.
FUNCTION
:
HaLf CYCLE HOLDBaCK - Remote
two-position maintained contact switch
is required for this function. Latchbolt is
retracted electrically when switch is in
open position. When remote switch is
returned to locked position, latchbolt will
extend when door is opened
approximately 2". Specify “D”. UL listing
not available with this function.
NO LaTCHBaCK - allows latchbolt to
extend without opening door. Normally
used with “D” function. Specify “NL”.
MECHaNICaL - Latchbolt is retracted
with a builder’s hardware key at the door,
and remains retracted until key is
returned, then it releases and
automatically latches and deadlocks
when the door is closed.
STANDARD FEATURES:
• Deadlock indication switch
• Strike with security fasteners
• faceplate with security fasteners
• Plug connector
• High torque motor
• Overcurrent and overtemperature
circuit protector. The protector requires
no manual resetting or replacement.
• fail secure
• Mounting fasteners
10300MD-NL-GIC ADTEC 2104
RETROFIT MOTOR OPERATED
ELECTRO-MECHANICAL
DEADLATCH
E L E C T R I C L O C K S
JAMB MOUNTED FOR
SWINGING DOORS
Minimum and medium security.
5909 West Loop South, Suite 310, Bellaire, Texas 77401 USA
Tel 281.300.3023 • Fax 713.583.6235
OFICINA DE REPRESENTACION: Rio Nilo No. 71, Mexico, D.F. 06500
Tel 55.5511.7041 • Fax 55.5208.2859
geotexic.com • [email protected]
— continued on back
11/1/11