Southern Folger 1058M MOTOR OPERATED ELECTRO-MECHANICAL DEADLATCH - Manual (Page 2)

FOR MORE INFORMATION, PLEASE CALL 210-533-1231 Revised 7/13
TECHNICAL DATA:
• STANDARD FINISH:
Galvanized
• COVER: 3/16” steel plate
• CASE: 3/16” steel plate
• STRIKE: (Hollow metal
door only) Stainless steel
• HOOKBOLT: Cold-rolled,
case-hardened steel
• DEADLOCK
ACTUATOR PIN: Cold-
rolled, case-hardened
steel
• TUMBLERS: Spring tem-
pered brass. Tumblers
actuated by phosphor
bronze springs, six
tumblers per lock.
• ELECTRICAL: 115 VAC,
1 phase, 60 Hz.,
.3 amp running
• LOCK SIZE:
17-13/16” H x 6-11/16” W x 3-1/2” D
• PARACENTRIC
CYLINDER:
Silicon bronze/copper alloy
• LOCK WEIGHT: 58 lbs.
• HOOKBOLT SIZE: 2” x 1/2”
• LATCHBOLT
ENGAGEMENT: 2-1/8”
1058M MOTOR OPERATED
ELECTRO-MECHANICAL
DEADLATCH
* Indicates lock mounting/ access plate side.
B8
Frame Preparation
NOTE: Drawing for illustration only. Reference template
for specific Information.
Swing Chart: Specify circled swing number when ordering.
E L E C T R I C L O C K S
JAMB MOUNTED FOR
SLIDING DOORS
Maximum security.
STANDARD FEATURES:
• Deadlock indicator switch
• Mechanical latchback by key
• Six-tumbler lock
• Plug connector
• Fail secure
• Mounting fasteners
• High torque motor
OPTIONAL FEATURES:
HALF CYCLE HOLDBACK -
Remote two position maintained
contact switch is required for
this function. Hookbolt is raised
electrically when switch is in
open position and lowered
when switch is in locked
position. Specify “D.”
24VDC MOTOR - Specify "24VDC"
STRIKE WITH SECURITY
FASTENERS IS OPTIONAL.
Note: Elongated paracentric key
is required for use with a 1300
track set.
090604SouthernFolger_final:INSIDE 8/21/09 5:22 PM Page 18