SP / Silicon Power SP004GBLTE133V01 - Manual

DDR3 UDIMM w/ECC
Product Specification
Features
• DDR3 functionality and operations supported as defined in the component data sheet
• 240pin, unbuffered dual in-line memory module (UDIMM)
• Supports ECC error detection and correction
• Fast data transfer rates: PC3-8500, PC3-10600
• Single or Dual rank
• 1GB(128 Meg x 72), 2GB (256 Meg x 72), 4GB (512 Meg x 72)
• V
DD
= V
DDQ
= 1.5V ±0.075V
• V
DDSPD
= 3.0V to 3.6V
• Reset pin for improved system stability
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Adjustable data-output drive strength
• Fly-by topology
• Terminated control, command, and address bus
• Serial presence-detect (SPD) EEPROM
• Gold edge contacts
• Pb-free
Rev. 1.1 Aug. 2011 1