Staub Electronics ECA-70MIXAMP-1-60 EPISODE - 60 WATT RACK MOUNTABLE 70 VOLT COMMERCIAL AMPLIFIER-MIXER - Manual (Page 8)

pg. 8
ECA-70MIXAMP-1-60 Installation Manual
COM 4-16 70V 100V EMC INPUT MUTE
+
OUTPUT
AUX2 INPUT MIX OUT AUX1 INPUT MIC2 MIC3 LINE INPUT
COM COM
MIC2 MIC3
1 2
3
1 2
3
MIC 2 +48V PHANTOM
MIC 3 +48V PHANTOM
MIC 2 XLR GAIN
MIC 3 XLR GAIN
INPUT~120V 60Hz 120W Fuse:T3.15A L 250V
ECA-70MIXAMP-1-60
PLAY
Blu-ray / DVD Player
PC Audio
Standard Connections
Advanced Connections
While the ECA-70MIXAMP-1-60 can be used in a variety of configurations, the diagram below shows the basic application.
Multiple ECA-70MIXAMP-1-60 can be used in a system where more audio distribution is needed. This is achieved by using the Unbalanced
Mix Outto the additional amplifiers.
1. Connect the Mix Out to the Aux 1 input of the second amplifier.
2. Repeat for additional amplifiers.
3. Adjust the tone of Amp 1 and then adjust the additional amps in order (Amp 1, Amp 2, and etc.).
XLR Pinouts
Cascading Amplifiers
Tip: Signal
Sleeve: Ground (GND)