Alpine IDA-X303 User Manual

Page 45

Advertising
background image

43

-EN

<JAPANESE CAR>

Secure the ground lead of the unit to a clean metal spot using a screw

(*

3

) already attached to the vehicle’s chassis.

iPhone/iPod Connection (sold separately)

Connect USB cable to an iPhone/iPod with Interface cable for
iPod.

Remove the iPhone/iPod

Remove the iPhone/iPod from Interface cable for iPod.

Remove the iPhone/iPod after the unit has been changed to a source

other than the iPhone/iPod. If the iPhone/iPod is removed while
playing, data may be lost.

If sound is not output or the iPhone/iPod is not recognized even when

the iPhone/iPod is connected, remove the iPhone/iPod once, then
connect it again, or reset the iPod.

Do not leave the iPhone/iPod in a vehicle for a long time. Heat and

humidity may damage the iPhone/iPod and you may not be able to
play it again.

USB memory Connection (sold separately)

Connect USB memory

1. Connect the USB cable to the USB connector of the unit, and
then secure the connection using the lock case supplied with
USB cable as shown below.

2. Connect USB memory to USB cable.

Remove USB memory

Pull out USB memory squarely from the USB cable.

When removing USB memory, pull it out straight.
If sound is not output or USB memory is not recognized even when

USB memory is connected, remove USB memory once, then connect
it again.

Change to a source other than the USB memory mode, then remove

the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.

Route the USB cable away from other cables.

Portable Audio Player Connection (sold separately)

Connecting a Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
Disconnect the Portable audio player.
Disconnect the cable supplied with the Portable audio
player from the USB cable.

Refer also to the Owner’s Manual of the Portable audio player.

Front Frame

Screws (M5 × 8)
(Included)

Mounting Bracket

Ground Lead

This unit

*

3

Interface cable for iPod (supplied)

USB cable

lock case

This unit

USB memory
(sold separately)

This unit

USB connector

USB memory
(sold separately)

Cable (supplied)

This unit

USB connector

USB memory
(sold separately)

Cable (supplied)

Advertising
This manual is related to the following products: