Staub Electronics WPS-700-BUL-A WIREPATH - TRUE DAY_NIGHT OUTDOOR VARIFOCAL BULLET CAMERA (600 TVL, D-WDR) - Manual (Page 15)

15
WPS-500-BUL-A Installation Manual
© 2012 Wirepath Surveillance
HLC (High Light Compensation) Setting
The HLC function is used to cut off exceptionally bright light, such as
vehicle headlights. Sensitivity can be adjusted based on the scene.
• LEVEL: Adjust the HLC LEVEL from
0 to 255. The larger the value,
the more sensitive the camera
will be to bright lights.
• MODE: HLC can be set to operate
ALL DAY or only when the camera
is in Black and White (B/W) mode
(NIGHT ONLY).
DAY & NIGHT
The camera allows for different configurations for Day
and Night surveillance. Set DAY&NIGHT value to COLOR,
EXT, AUTO, or B/W based on the installation application.
• AUTO: The camera uses the lens to
determine color or B/W. When in
AUTO mode, the camera automatically
switches to B/W when lighting levels are
low, and back to color when they
increase.
• COLOR: The camera remains in color all
of the time.
• B/W: The camera remains in black and white (B/W) all of
the time.
• EXT: This mode uses the external IR sensor in the camera to
switch to color or B/W. This is the recommended setting.
AUTO Setting
When setting the DAY/NIGHT mode to
AUTO, the camera uses the lens to detect
the Lux rating of the picture and switches to
color or B/W automatically.
HLC
LEVEL --------|-------200
MODE
ALL DAY
RETURN RET
DAY NIGHT AUTO
D  N LEVEL --------|--------091
D  N DELAY 1 SEC
N  D LEVEL ---|-------------046
N  D DELAY 5 SEC
RETURN RET
SETUP
LENS MANUAL
EXPOSURE
WHITE BAL.
AWCSET
BACKLIGHT OFF
DAY&NIGHT AUTO
DPC
SPECIAL
RESET
EXIT