Maintaining your trc-1280, Specifications – Staub Electronics TRC-1280 URC - TOTAL CONTROL 2 WAY TEXT FEEDBACK REMOTE W_OLED INTERFACE User Manual

Page 11

Advertising
background image

TRC-1280 T

OUCH

S

CREEN

Page 8

Maintaining Your TRC-1280

Be careful not to scratch the touch screen, only use your finger to tap the
LCD touch screen or use a plastic pen top or PDA stylus. Never use a real
pen, pencil or any other sharp object on the screen. Keep it away from
extreme cold or heat. The TRC-1280 is not waterproof. Do not use it in any
location that is damp or wet. If you spill water on it, take out the battery
pack and let the TRC-1280 dry for 48 hours before you try powering it up
again. If you spill coffee or another beverage on it, clean it with distilled
water. Make sure no water gets inside the TRC-1280. The touch screen con-
tains a glass element. Be careful to not drop the TRC-1280 or slam it against
anything.

Use a soft, damp cloth to clean the screen. If the screen still shows finger
prints, clean it with watered down window-cleaner. Do not use anything
abrasive and don’t use too much water, some might leak into the interior.

Specifications

Microprocessor: 533MHz ARM9

RAM: 128Mbyte Mobile DDR

NAND: 128Mbyte

LCD: 2.8 Inch Screen (240 by 320) LCD Backlighting by LED

Sound: Mono 1 watt

Devices: Supports up to 255 Devices with text, less with heavy graphics

usage Pages: Supports up to 255 Pages on each Device with text, less with

heavy graphics usage

Macro Capability: Up to 255 steps each, however nesting is allowed

Wi-Fi: IEEE 802.11B(11Mbps), G(54Mbps)

Battery: Lithium polymer, 2400mAh

Battery Charging Time: 5 Hours

Dimensions: 8.8” Height x 2.3” Wide x 0.9" Thick

Battery Warranty: 1 Year

Weight (without AC Adapter): 7.8 oz

Advertising