Setup and operation, Starting and shutting down the projector, Tarting and – Staub Electronics D803-3D VIVITEK - 3D DIGITAL PROJECTOR (3600 LUMENS) User Manual
Page 18: Hutting down the, Rojector, Etup and, Peration
DLP Projector—User’s Manual
— 10 —
S
ETUP AND
O
PERATION
Starting and Shutting down the Projector
1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The
POWER LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED not a flashing.
Then press the
POWER button to
turn on the projector.
The projector splash screen displays and
connected devices are detected.
See Setting an Access Password
(Security Lock) on page 12 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the SOURCE button and
use ▲▼ to scroll among devices.
• VGA: Analog RGB
• Component: DVD input YCbCr / YPbPr, or HDTV input
YPbPr.
• Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
• HDMI 1/HDMI 2: High-Definition Multimedia Interface