Steelcraft Automotive 52240 GRILL GUARD User Manual
Page 4
GRILLE GUARD
07-11 SPRINTER VAN
Page 4 of 6
6/6/11 Rev2 (DP)
Driver Side Installation Pictured
Remove factory screw
Insert 8mm x 25mm "Z"
Bolt Plate into the factory
hole from behind the
radiator crossmember
Insert (2-3) 8mm x16mm Flat Washers as a spacer
between the Top Bracket and the radiator
crossmember. NOTE: It may be necessary to gently
push down on the plastic grille to provide clearance
for the Flat Washers/Spacer behind the Top Bracket.
Secure the Top Bracket to the Bolt Plate with:
8mm Lock Washer
8mm x 16mm x 1.6mm Flat Washer
8mm Hex Nut
Fig 8
(Fig 7) Pictured with Grille Guard Installed
Fig 10
(Fig 9) Back of radiator crossmember pictured
Fig 11
8mm x 40mm Hex Bolt
8mm Lock Washer
8mm x 24mm x 2mm Flat Washer
Top of plastic grille
Front
Front
Front
Front
Front
Factory hole
in radiator
crossmember