Steelcraft Automotive 212450 3 ROUND SIDE BAR - Manual (Page 2)

90-DEGREE BENT END SIDEBAR
99-12 FORD F-250/450 SUPERDUTY REG, SUPER AND SUPER CREW CABS
Page 2 of 3 6/29/12 Rev3 (DP)
To protect your investment, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver Side Installation Pictured
(Fig 1) Driver side front mounting location
Fig 2
(Fig 3) Front Bracket Spacer on driver side
Fig 4
Line up Clip Nut
with factory hole
Front
Back of pinch weld
Disregard extra slot
on front bracket
installation
Spacer installs between the body
panel and front Bracket only
Front
Front
Front