Steelcraft Automotive 211900 3 ROUND SIDE BAR - Manual (Page 2)

Driver Side Rear Bracket Shown
11.Repeat steps 2-10 for Passenger Side Bar.
12. Do periodic inspections to the installation to make sure that all hardware is secure and
tight.
(Driver Side Shown)
Page 2 of 2
1/30/07 (AM)
Remove these existing
bolts from front end of
pinch weld
(2) 6mm Hex Bolts,
(2) 6mm Nylock Nut, &
(4) 6mm Flat Washers
(1) 10mm Bolt Plate,
(1) 10mm Nylock Nut,
& (1) 10mm Flat
Washer.
(1) 12mm Hex Bolt,
(1) 12mm Lock Washer, &
(1) 12mm Flat Washers
Front 10mm Bolt Plate
Rear 12mm Bolt Plate
(1) 12mm Bolt Plate,
(1) 12mm Nylock Nut, &
(1) 12mm Flat Washers
(2) 8mm Hex Bolts,
(2) 8mm Lock Washers,
& (2) 8mm Flat Washers
Fig 1 Fig 2
Fig 3 Fig 4