Steelcraft Automotive 430907 4 OVAL SIDE BAR User Manual

Steelcraft Automotive For the car

Advertising
background image

4" OVAL STRAIGHT SIDE BARS

05-11 TACOMA DOUBLE CAB

Page 1 of 2

4/1/11 Rev1(DP)

Driver/Left Side Front
Mounting Bracket

Driver/Left Side Rear
Mounting Bracket

Driver/Left Side Center
Mounting Bracket

PARTS LIST:

1 Driver Sidebar

12 8-1.25mm x 30mm Hex Bolts

1 Passenger Sidebar

12 8-1.25mm x 25mm Hex Bolts

1

Driver/Left Front Mounting Bracket

12

8mm x 28mm OD x 3mm Large Flat
Washers

1 Passenger/Right Front Mounting Bracket

12 8mm x 24mm OD x 2mm STD Flat Washers

1 Driver/Left Middle Mounting Bracket

24 8mm Lock Washers

1 Passenger/Right Middle Mounting Bracket

1 Driver/Left Rear Mounting Bracket

1 Passenger/Right Rear Mounting Bracket



















PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Starting on the driver side front of the vehicle, use a flat screw driver to remove the plastic

plugs. Partially attach driver side front Mounting Bracket to vehicle using the included (2) 8mm
x 30mm Hex Bolts, (2) 8mm Lock Washers, and (2) 8mm x 28mm x 3mm Large Flat Washers.
Repeat this step for center and rear Mounting Bracket installation.

3. Carefully place the driver Sidebar onto the Brackets. Align the threaded inserts in the bottom of

the Side Bar with the slots on the Mounting Brackets. Attach the Sidebar to the Mounting
Brackets with the included (6) 8mm x 25mm Hex Bolts, (6) 8mm Lock Washers and (6) 8mm x
24mm OD x 2mm STD Flat Washers. Do not tighten hardware at this time.

4. Level and adjust the Sidebar properly and tighten all hardware.
5.
Repeat Steps 2-4 for passenger Sidebar installation.
6.
Do periodic inspections to the installation to make sure that all hardware is secure and tight.


To protect your investment
, wax this product after installing. Regular waxing is recommended to add a
protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could
damage the finish.
For stainless steel
: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild
soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.

Passenger/Right Side
Rear Mounting Bracket

Passenger/Right Side
Center Mounting Bracket

Passenger/Right Side
Front Mounting Bracket

Advertising