Steelcraft Automotive 255090 3 ROUND SIDE BAR - Manual (Page 2)

Front Driver Side Mounting Bracket Shown
Rear Driver Side Mounting Bracket Shown Installation Complete
14. Repeat steps 2-13 for passenger Side Bar.
15. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
Page 2 of 5
4/16/07 (AM)
Do not use this hole
8mm x 30mm Hex Head Bolt,
8mm Lock Washer, &
8mm Flat Washer
8mm x 30mm Hex Head Bolt,
8mm Lock Washer, &
8mm Flat Washer
Cut out the marked
location on the plastic
cover. See Drawings
below
Do not use these holes
Figure 1
Figure 2
NOTE: This picture is
for reference only. Rock
shield should be
hanging from rear
bracket at this point