Steelcraft Automotive 32250 TAILLIGHT GUARD - Manual (Page 2)

TAILLIGHT GUARD
09-10 DODGE RAM 1500
Page 2 of 2
11/20/08 (DP)
DRIVER SIDE INSTALLATION PICTURED
Remove these
factory screws
Gently but firmly slide taillight
housing straight back from fender
6mm x 20mm Button
Head Screws
6mm Flat Washers
6mm Nylock Nut
Fig 1 Fig 2
Fig 3 Fig 4
Secure the Taillight Guard to
the Support Bracket with:
4mm x 15mm Phillips Screw
4mm Lock Washer
4mm Flat Washer
Fig 5
Carefully close the
tailgate to check for
clearance and adjust
the brackets as
necessary. Use the
factory screws to
fasten the Taillight
Guard to the vehicle