Steelcraft Automotive 82120 REAR BUMPER GUARD - Manual (Page 2)

DOUBLE TUBE REAR BUMPER GUARD
11-13 JEEP GRAND CHEROKEE
11-13 DODGE DURANGO
Page 2 of 2 3/21/11 (DP)
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used also to clean the Bumper Guard.
For gloss black finishes: Mild soap may be used to clean Bumper Guard.
Driver Side Installation Pictured
Remove factory hex bolts
Bolt Mounting Bracket to side of
frame channel with factory hex bolts
(2) 12mm x 35mm Hex Bolts
(4) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
Fig 1
Fig 2
Fig 3
Trim or remove excess
sealant as necessary to clear
bracket for proper fitment