Sunex Tools 6609 - Manual

6609 1 rev. 09/26/08
Low Height ...................................................................... 6-1/4"
Raised Height ...............................................................22.375"
Length ..................................................................................61"
Chassis Width ................................................................. 7-3/4"
Chassis Width w/ Swivel Caster Bracket....................18.375"
Handle Length .............................................................. 45-3/4"
Saddle Diameter ............................................................. 5-7/8"
Shipping Weight .......................................................... 338 lbs.
SPECIFICATIONS
OWNER'S MANUAL
MODEL 6609
CAPACITY: 10 TON
HYDRAULIC SERVICE JACK
CONTENTS:
Page 1 Specifications and Features
2 Warning Information
3 Setup, Operating and Maintenance
4 Trouble Shooting and Warranty Information
5 Exploded View Drawing
6 Replacement Parts
FEATURES:
• Uniweld constructed hydraulic assembly for increased strength and eliminates leaking.
• Flash chromed ram and pump piston inhibit rust.
• Foot pump pedal for quickly raising the lift arm to the load.
• Locking lever on "T" handle locks handle in three different positions.
• Release knob on top of handle operates independent of handle locking lever.
• Safety by-pass and overload systems prevent over extending ram and
prevents jack from being used beyond its rated capacity.
• Full swivel ball bearing caster wheels with zerk grease fittings.
• Front wheels include roller bearings.
• Rear kick plate helps turn jack when in tight places.
© Copyright 2008, Sunex Tools®