Sunex Tools 5218 - Manual

5218 1 rev. 12/31/04
FEATURES
4 Boom Positions with Rated Capacity Indicated
Heavy Duty Slow Release Power Unit
4" Front Leg Clearance
8 Ton Quick Lift Ram
OWNER/USER RESPONSIBILITY:
The owner and/or user must have a thorough understanding
of the manufacturer’s operating instructions and warnings
before using this mobile crane. Personnel involved in the
use and operation of equipment shall be careful, competent,
trained, and qualified in the safe operation of the equipment
and its proper use when servicing motor vehicles and their
components. Warning information should be emphasized
and understood. If the operator is not fluent in English, the
manufacturer’s instructions and warnings shall be read to and
discussed with the operator in the operator’s native language
by the purchaser/owner, making sure that the operator com-
prehends its contents.
Owner and/or user must study and maintain for future
reference the manufacturer’s instructions. Owner and/or user
is responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and literature
are available from the manufacturer.
THIS CRANE IS DESIGNED FOR ENGINE LIFTING PURPOSES ONLY.
WHEN REMOVING ENGINES FROM VEHICLES, BE SURE THAT THE
FRONT OF THE VEHICLE IS NOT JAMMED AGAINST THE
HYDRAULIC UNIT. FAILURE TO OBSERVE THIS WARNING COULD
RESULT IN A DROPPED ENGINE.
A VISUAL INSPECTION SHOULD BE MADE BEFORE EACH USE OF
THE CRANE, CHECKING FOR LEAKING HYDRAULIC FLUID AND
CRACKED, DAMAGED, LOOSE OR MISSING PARTS.
DO NOT OVERLOAD. OVERLOADING CAN CAUSE DAMAGE TO OR
FAILURE OF THE MOBILE CRANE.
LOWER BOOM AND LOAD TO THE LOWEST POSSIBLE POSITION
BEFORE TRANSPORTING.
ASSURE THAT THE LOAD IS NOT ALLOWED TO DROP SUDDENLY
OR SWING DURING TRANSPORTING.
MAKE SURE THAT BOOM IS FULLY LOWERED BEFORE ADDING OIL
TO UNIT RESERVOIR.
THIS MOBILE CRANE IS DESIGNED FOR USE ONLY ON HARD LEVEL
SURFACES CAPABLE OF SUSTAINING THE LOAD. USE ON OTHER
THAN HARD LEVEL SURFACES CAN RESULT IN MOBILE CRANE
INSTABILITY AND POSSIBLE LOSS OF LOAD.
NO ALTERATIONS TO THE MOBILE CRANE SHALL BE MADE. USE
ONLY SLINGS OR CHAINS WITH CAPACITY GREATER THAN THAT
OF THE LOAD BEING LIFTED.
READ, STUDY AND UNDERSTAND THE INSTRUCTION MANUAL
PACKED WITH THIS CRANE BEFORE USING CRANE.
FAILURE TO HEED THESE WARNINGS MAY RESULT IN LOSS OF
LOAD, DAMAGE TO CRANE, AND/OR FAILURE RESULTING IN
PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.
SPECIFICATIONS:
Pos. 1 Pos. 2 Pos. 3 Pos. 4
Max. Boom Ht. ..........95.25" ........91.25" ........ 87" ............82.5"
Min. Boom Ht. ............... 0" .............5.75" ....... 12.25" .........18.5"
Boom Capacity .......... 1/2 Ton .........1 Ton .....1-1/2 Ton .......2 Ton
Boom Ext. From End
to Ram ..................... 50" ............42.5" ........ 35.5" ..........28.5"
Base Dimensions – Open
Width Back ................................................................... 34"
Width Front .............................................................. 35.5"
Length ....................................................................... 69.5"
Base Dimensions – Folded
Width Back ................................................................... 34"
Width Front ................................................................. 24"
Depth ......................................................................... 21.5"
Power Unit .......................... 8 Ton Heavy Duty Quick Lift
Shipping Weight ...................................................210 Lbs.
(Shipped in 2 boxes)
MODEL #5218
4000 LB. CAPACITY
BREAKDOWN ENGINE CRANE
LOW CLEARANCE WITH 8 TON QUICK LIFT RAM
PARTS BREAKDOWN AND OPERATING MANUAL
THIS OPERATING MANUAL CONTAINS
IMPORTANT SAFETY INFORMATION.
READ CAREFULLY AND UNDERSTAND
ALL INFORMATION BEFORE OPERATING
TOOL. SAVE THIS MANUAL FOR FUTURE
USE.