Superwinch H10P PRO - 4,300 kgs (Standard Drum with Load Control Valve) complies with EN14492-1 - Manual (Page 4)

Owners Manual 5-201-001 Issue 3 4 Page
Model Designation H8P H8P H10P H10P
Standard Drum Long Drum Standard Drum Long Drum
Part No: 5050PRO 5060PRO 5170PRO 5172PRO
650006PRO
Weight (Less Rope): 42 kg 45 kg 42 kg 45kg
Recommended Rope Diameter: 10 mm 10 mm 11 mm 11mm
Drum Capacity: 27 M 36 M 20 M 26 M
Drum Diameter (10:1 D:d ratio): 90mm 90mm 101.6mm 101.6mm
Line Speed (1st Layer, No Load): 14.7 M/min 14.7 M/min 10.0 M/min 10.0 M/min
Line Pull (Bottom Layer): 34.9 kN 34.9 kN 42.16 kN 42.16 kN
Maximum Oil Pressure: 155 bar 155 bar 155 bar 155 bar
Maximum Oil Flow: 60 L/min 60 L/min 60 L/min 60 L/min
Freespool Manual Manual Manual Manual
To ensure that winches are compliant with the European standard, BS-EN14492-1 Superwinch recommends that wire ropes
should be as follows:
10mm dia for H8P winch with a tensile grade of 1960 and a min break figure of 7,119kg (69.8kN)
11mm dia for H10P winch with a tensile grade of 1960 and a min break figure of 8,608kg (84.4kN)
02
SPECIFICATION DATA
Gear Reduction: High efficiency planetary for optimum reliability.
Drum: Fabricated steel mounted on maintenance free plain bearings.
Braking: Full Load Holding.
Mounting: Designed to most industry standard dimensions, this winch can be side,
foot or angle mounted, flat bed or low mount.
Pneu. Freespool Supply Pressure: 5.5 bar.
Load Limiter: Hydraulic system relief valve on vehicle (installers responsibility).
Labelling: Rating Plate showing 1st layer and top layer figures.
Roller Fairlead warning label.